0
toolmateparts.com
0
Home » Shop » hot sale » Absolute Process Instruments API 3200 G M01 _ DC voltage input DC voltage feedback valve positioner

Absolute Process Instruments API 3200 G M01 _ DC voltage input DC voltage feedback valve positioner

Original price was: $255.20.Current price is: $191.46.

Sale!

43 in stock

SKU: API 3200 G M01 Category:
Share

Absolute Process Instruments API 3200 G M01 _ DC voltage input DC voltage feedback valve positioner

Features:

  • Automatic or Manual Valve Control
  • Test/Manual Positioning Buttons
  • Input LoopTracker® LED
  • Relay Status LEDs
  • High Capacity Relay Contacts

Applications:

  • Valve Position Controller
  • Linear Actuator Controller
  • Damper Controller

The API 3200 G M01 controls the position of a valve or linear actuator by comparing a DC voltage control signal to that of a voltage feedback signal.

The API 3200 G M01 have heavy-duty relay contacts allow the modules to directly control high capacity loads without a secondary device.

Auto/Manual Switch

A top-accessible Auto/Manual switch allows either closed-loop automatic control of valve position or manual positioning via the Open/Close push buttons. The manual mode is useful for troubleshooting, calibration, system testing or as a manual bypass.

LoopTracker and Relay Status LEDs

API exclusive features include a LoopTracker LED that varies in intensity with changes in the input signal. Monitoring this LED can provide a quick visual picture of your process at all times and save time during initial startup and/or troubleshooting. A red/green bi-color LED visually indicates control relay status. The LED indicates green for opening, red for closing and off for neutral position.

Specifications Table:

Control Input and Feedback 0-1 V, 0-5 V, 1-5 V, 0-10 VDC(voltage input / voltage feedback)
Control Input Impedance
  • Voltage: 200 kΩ min.
  • Current: 50 Ω typical
Input Voltage Burden (Current) 1.25 VDC maximum
Common Mode Rejection 100 dB minimum
Input Calibration Single-turn zero and span potentiometers (±10% of span adjustment range typical)
Manual Controls Automatic/manual switch. Manual open and close buttons.
Relay Output
  • Relay Output SPDT relay with neutral contact position
  • 8 A max at 240 VAC resistive load
  • Caution: Do not exceed socket voltage rating
  • Use an RC snubber for inductive loads
Deadband 12 turn potentiometer adjustable from 1 to 25% of span
Response Time 100 milliseconds typical
Ambient Temperature Range and Stability
  • -10°C to +60°C operating ambient
  • Better than ±0.02% of span per °C stability, calculated, not tested
Housing
  • IP 40, requires installation in panel or enclosure
  • API 011 or API 011 FS socket
Sockets Socket mounts to 35 mm DIN rail or can be surface mounted
Power 115 VAC ±10%, 50/60 Hz, 2.5 W max