AEMC MR6292 Description:
This AC/DC is required for taking measurements in BSG (both sides grounded) mode with the 6292 and also has a proportional mV output for direct reading on the Micro-Ohmmeter.
AEMC MR6292 Specifications:
| Measurement Range | 1 to 50ADC |
| Accuracy | 1 to 50ADC: 1.5% reading ± 0.2A |
| Output Signal | 10mV/ADC |
| Load Impedance | >100k?/100pF |
| Insertion Impedance | 0.39m? @ 50Hz, 58m? @1000Hz |
| Working Voltage | 600Vrms |
| Influence of Adjacent Conductor | <10mA/A at 50Hz at 23mm from the probe |
| Influence of Conductor in Jaw Opening | 0.5% reading |
| Power Source | Powered by Micro-Ohmmeter Model 6292 |
| Jaw Opening | 1.2″ (31mm) |
| Maximum Cable Diameter | One 1.18″ (30mm) or two 0.95″ (24mm) or two bus bars 1.2 x 0.4″ (31.5 x 10mm) |
| Output | 4-conductor shielded cable with 5-pin XLR connector |
| Dimensions | 8.8 x 3.82 x 1.73″ (224 x 97 x 44mm) |
| Weight | 15 oz (440g) |
| Saftey | EN 61010-2-32, 600V CAT III, Pollution: 2 |
What’s included with the AEMC Instruments MR6292
- AEMC MR6292 Current Probe for the 6292 Micro-Ohmmeter, AC/DC
