Must read installation directions in box before application!
GLEXO DIABLO COLD GLUE is a high-performance, pre-formed cold-glue compound engineered for professional paintless dent repair (PDR). It delivers outstanding initial tack, shape stability, and repeatable pull strength across a broad range of ambient conditions. Supplied pre-formed in silicone trays, it streamlines preparation and ensures consistent performance. Use with quality PDR tabs for best results.
DIABLO is compatible with most metal-stem PDR tabs. Select a tab that fully covers or slightly exceeds the dent footprint to avoid inducing new deformation around the repair site.
Preparation & Storage Guidelines
For professional use only
Store trays flat in their original packaging or another clean container
Recommended storage temperature: 10–35 °C (50–95 °F)
Acceptable short-term exposure: 4–45 °C (39–113 °F)
Keep away from open flames and direct heat sources. Humidity does not affect storage
Field-Proven Practical Tips
Full coverage of the dent by the tab/glue face is critical for effective lift and minimizing collateral deformation
DIABLO works across a wide ambient range; higher temperatures can improve adhesion but are not required
Do not over-compress the glue when embedding the tab; excessive pressure can stretch the compound and reduce efficiency
Cleaning, Reuse & Maintenance
Keep prepared tabs clean and protected from dust; use release films or dust caps during storage
If contaminated, gently warm the glue surface until it re-flows to a glossy finish; let cool to restore performance
Residual glue on the vehicle can be removed with isopropyl alcohol or a suitable solvent
